In this article, we will discuss the proper bending position to get water from a dispenser. We have also included a table with different types of water dispensers and their respective bending positions in this document.

To get water from a drink dispenser, you must first bend over your waist and reach your arm as low as possible. Then you should slowly rotate your wrist in a counterclockwise direction until the spout is pointing down at the ground. It should then take just seconds for the flow to start coming out of that spout. However, depending on the water dispenser, you should adjust your arm’s position accordingly. When bending over to access a ‘blue’ water dispenser, you should ensure that your wrist is positioned slightly higher than when retrieving a drink from a ‘red’ dispenser.

Dispensers and Their Bending Positions

A blue drink dispenser has a much larger vertical diameter than a red drink dispenser and thus needs to be bent over further to obtain proper flow. For example, to fetch water from a red beverage dispenser without significant spillage or splashing of liquid, the angle between the elbow and wrist should be about 90 degrees. Whereas for the blue drink dispenser, the angle between the elbow and wrist should be closer to 135 degrees.

It should be noted that most if not all these dispensers are rectangular, and thus the distances may vary with different shaped hands. The position of your wrist is related to the type of dispenser you are using. Blue drink dispensers have a larger vertical diameter, so bending over further is needed. Red drink dispensers have a smaller vertical diameter, so turning over more is required.

A blue water dispenser being bent over further requires more movement at the wrist. The Red water dispenser needs less activity at the wrist. You do not have to turn that much. But you don’t get any more water from it if you need to bend it any further – there are no more holes for water to fall out through. We will look at the bending positions for dispensers i, ii, and iii:

A red water dispenser being bent over further requires less movement at the wrist. The Bluewater dispenser needs more movement at the wrist. You do not have to turn that much. But you don’t get any more water from it if you need to bend it any further – there are no more holes for water to fall out through.

Bending While Getting Water From a Dispenser:

You should bend over your waist and reach your arm down as low as possible. Then you should slowly rotate your wrist in a counterclockwise direction until the spout is pointing down at the ground. It should then take just seconds for the flow to start coming out of that spout.

However, depending on the water dispenser, you should adjust your arm’s position accordingly. When bending over to access a ‘blue’ water dispenser, you should ensure that your wrist is positioned slightly higher than when retrieving a drink from a ‘red’ dispenser.

A blue drink dispenser has a much larger vertical diameter than a red drink dispenser and thus needs to be bent over further to obtain proper flow. For example, to fetch water from a red beverage dispenser without significant spillage or splashing of liquid, the angle between the elbow and wrist should be about 90 degrees. Whereas for the blue drink dispenser, the angle between the elbow and wrist should be closer to 135 degrees.

Hey! Do You Wanna Buy Best Water Dispenser Then Click Me.

Conclusion

To obtain water from a drink dispenser, you must first bend over your waist and reach your arm as low as possible. Then you should slowly rotate your wrist in a counterclockwise direction until the spout is pointing down at the ground. It should then take just seconds for the flow to start coming out of that spout. However, depending on the water dispenser, you should adjust your arm’s position accordingly. When bending over to access a ‘blue’ water dispenser, you should ensure that your wrist is positioned slightly higher than when retrieving a drink from a ‘red’ dispenser.